Filter
Top Products
The Control Panel 20
User’s Guide
Details of Menu mode
PRINTER SETUP
Item Parameter Explanation
PLATEN GAP NARROW You can adjust the distance between the print head
and paper.
❏ STANDARD: Normally, select STANDARD.
❏ When selecting other than STANDARD, the following
icon appears on the LCD panel.
NARROW:
WIDE:
WIDER:
WIDEST:
STANDARD
WIDE
WIDER
WIDEST
PAGE LINE ON You can select whether to print a page line (line along
which to cut) on the roll paper. Select ON if you want to
print the page line, or OFF otherwise.
The vertical line may be printed when the roll paper
width that is set in the printer driver is smaller than the
width of the roll paper that is loaded in the printer.
* This setting is available for roll paper only.
OFF
ROLL PAPER MARGIN DEFAULT You can select margins for roll paper.
❏ DEFAULT:
The top and bottom margins are 15 mm and left
and right margins are 3 mm.
*The top margin of Premium Glossy Photo Paper
(250), Premium Semigloss Photo Paper (250), and
Premium Luster Photo Paper (260) are 20 mm and
the bottom margin is 15 mm.
❏ TOP/BOTTOM 15mm:
The top and bottom margins are 15 mm and left
and right margins are 3 mm.
❏ TOP 35/BOTTOM 15mm:
The top margin is 35 mm, bottom is 15 mm, and left
and right are 3 mm.
❏ 15mm:
The margins of all four sides are 15 mm.
❏ 3mm:
The margins of all four sides are 3 mm.
The print area does not change even when the margins
are changed.
TOP/BOTTOM15mm
TOP 35/BOTTOM 15mm
15mm
3mm