Filter
Top Products
1-4 Installation
Connecting the Printer to the Computer
You need an appropriate serial interface cable to connect your
computer to the printer.
TM-T85
1. Make sure that the printer and the computer are turned off.
Then plug the cable into the connector on the printer, as shown.
Note:
Your printer comes with inch-type hexagonal lock screws installed.
If you plan to use an interface cable that requires millimeter-type
lock screws, replace the inch-type screws with the enclosed
millimeter-type screws by using a hex screwdriver (5 mm). To
distinguish the two types of screws, see the illustration below.
2. Connect the other end of the cable to the connector on your
computer.
Notch (one or more lines)
Millimeter-type
Inch-type