Filter
Top Products
1-10 Installation
Arranging the Interface Cable
After you have plugged in all the cables, put the interface cable
between the feet on the bottom of the printer and the cable-holding
posts, as shown in the illustration below. This helps keep the cable
securely fastened.
Installing the Paper Roll
The procedure describes how to install a paper roll for the first
time. If you are replacing a used-up paper roll, see page 2-2.
Note:
Be sure to use roll paper that meets the specifications.
1. Open the printer cover. Do not open the auto cutter.
Note:
To prevent paper jams, make sure that the auto cutter tab is
underneath the auto cutter holder as shown on the auto cutter
label.