Filter
Top Products
Commands 5-31
[Notes] • When the panel buttons are disabled, none of them are usable
when the printer cover is closed.
• In this printer, the panel button is the
PAPER FEED
button.
• When the printer cover is open, the
PAPER FEED
button is enabled
regardless of the settings of this command.
• In the macro ready mode, the
PAPER FEED
button is enabled
regardless of the settings of this command; however, the paper can
not be fed by using this button.
[Default]
n
= 0
ESC d
n
[Name] Print and feed
n
lines
[Format] ASCII ESC d
n
Hex 1B 64
n
Decimal 27 100
n
[Range] 0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds
n
lines.
[Notes] • This command sets the print starting position to the beginning of
the line.
• This command does not affect the line spacing set by
ESC 2
or
ESC 3
.
• The maximum paper feed amount is 40 inches. If the paper feed
amount (
nx
line spacing) of more than 40 inches is specified, the
printer feeds the paper only 40 inches.
ESC i
[Name] Execute partial cut (one point left uncut)
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] Executes a partial cut with one point left uncut.
[Notes] • In standard mode, this command is enabled only when input at the
beginning of a line.
• This command and
GS V 1
cut paper in the same way.
[Reference]
GS V
ESC p
m t1 t2
[Name] Generate pulse
[Format] ASCII ESC p
m t1 t2
Hex 1B 70
m t1 t2
Decimal 27 112
m t1 t2
[Range]
m
= 0, 1, 48, 49