Filter
Top Products
5-18 Commands
[Notes] • When the printer is disabled, it ignores all data except for error-
recovery commands (DLE ENQ 1, DLE ENQ 2) until it is enabled
by this command.
[Default] n = 1
[Reference] DLE ENQ
ESC ?
n
[Name] Cancel user-defined characters
[Format] ASCII ESC ?
n
Hex 1B 3F
n
Decimal 27 63
n
[Range] 32
≤
n
≤
126
[Description] Cancels user-defined characters.
[Notes] • This command cancels the pattern defined for the character code
specified by
n
. After the user-defined characters is canceled, the
corresponding pattern for the internal character is printed.
• This command deletes the pattern defined for the specified code
in the font selected by ESC !
• If a user-defined character has not been defined for the specified
character code, the printer ignores this command.
[Reference] ESC &, ESC %
ESC @
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer mode to the
mode that was in effect when the power was turned on.
[Notes] • The DIP switch settings are not checked again.
• The data in the receive buffer is not cleared.
2 - - - Undefined.
3 - - - Undefined.
4 - - - Undefined.
5 - - - Undefined.
6 - - - Undefined.
7 - - - Undefined.
Bit Off/On Hex Decimal Function