Filter
Top Products
5-36 Commands
Table 1 Table 2
Character Width Selection Character Height Selection
[Notes] • This command is effective for all characters (except for HRI
characters).
•It
n
is outside of the defined range, this command is ignored.
• In standard mode, the vertical derection is the paper feed
direction, and the horizontal derection is perpendicular to the
paper feed direction. However, when character orientation
changes in 90° clockwise-rotation mode, the relationship between
vertical and horizontal directions is reversed.
• In page mode, vertical and horizontal directions are based on the
character orientation.
• When characters are enlarged with different sizes on one line, all
the characters on the line are aligned at the baseline.
•The ESC ! command can also turn double-width and double-
height modes on or off. However, the setting of the last received
command is effective.
[Default]
n
= 0
[Reference] ESC !
G S $
n
L
n
H
[Name] Set absolute vertical print position in page mode
[Format] ASCII GS $
nL nH
Hex 1D 24
nL nH
Decimal 29 36
nL nH
[Range] 0
≤
nL
,
nH
≤
255
[Description] • Sets the absolute vertical print starting position for buffer
character data in page mode.
• This command sets the absolute print position to [(
nL
+
nH
✕
256)
✕
(vertical or horizontal motion unit)] inches.
[Notes] • This command is effective only in page mode.
• If the [(
nL
+
nH
✕
256)
✕
(vertical or horizontal motion unit)]
exceeds the specified printing area, this command is ignored.
Hex Decimal Width Hex Decimal Height
00 0 1 (normal) 00 0 1 (normal)
10 16 2 (double-width) 01 1 2 (double-hight)
20 32 3 02 2 3
30 48 4 03 3 4
40 64 5 04 4 5
50 80 6 05 5 6
60 96 7 06 6 7
70 112 8 07 7 8