Filter
Top Products
To perform the test multiple times, press 2 and Enter. You
see this prompt:
Terminate checking if an error detected (Y/N)?
Press Y and Enter to terminate checking if the device produces
an error, or press N and Enter to repeat the tests regardless of
an error.
You see this prompt:
How many times (1-9999):
Type the number of times you wish to repeat the test; then
press Enter. The tests for the device now start.
Resuming From an Error
If an error occurs during a test, the test stops at that point,
and an error code and error message are displayed. If you want
to record the problem, you can print out the message on your
printer. You see this prompt:
Do you want a printout of the error message(s) (Y/N)?
To continue without printing the error message, press N and
Enter.
Before you request a printout, be sure your printer is
turned on and on-line, and the paper is installed correctly.
Then press Y and Enter. If the printer is not ready, the
following message and prompt are displayed:
Printer is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the problem and press Y and Enter to continue
printing, or press N and Enter to cancel printing.
After printing the error message, the program displays this
prompt:
Printout is finished. Press Enter to return to the menu.
Performing System Diagnostics
D-3