Filter
Top Products
MS-DOS displays these messages:
Insert SOURCE diskette in drive A:
Press any key when ready . . .
4. If the MS-DOS diskette is in drive A, remove it. Then
insert the diskette you want to copy from in the drive and
press any key.
DISKCOPY copies the contents of the diskette to the
computer’s memory. The screen displays these messages
while copying:
Copying 80 tracks
9 Sectors/Track, 2 Side(s)
When all the files have been copied or the memory is full,
the screen displays these messages:
Insert TARGET diskette in drive A:
Press any key when ready . . .
5.
Remove the diskette from drive A and insert the blank
diskette in the drive.
DISKCOPY checks to see if the new diskette is formatted.
If it is not, DISKCOPY formats the diskette. You see the
message:
Formatting while copying
The copy operation begins when the format is complete.
You see these messages:
Copying 80 tracks
9 Sectors/Track, 2 Side(s)
If the source diskette contains more data than can be
stored in the computer’s memory (which is 640KB), the
screen prompts you to insert the source diskette again to
copy the remaining data to memory. Then it prompts you
to insert the target diskette again to copy the remaining
data from memory to the diskette. Follow the instructions
on the screen.
4-10
Using MS-DOS With the Equity LT