Filter
Top Products
16.
Replace the latch mechanism you removed in step 9. Be
careful to seat it properly, as shown below. Also be sure
the one on the left side is properly aligned.
17. When all the components are seated inside the screen,
replace the front cover you removed in step 8. Be sure the
cover fits correctly and the edges of the front and back
meet squarely; if not, lift off the cover, re-align the inside
components, and try again.
18. Hold the screen firmly so both sides stay together and turn
it over so the back faces up.
19. Replace the screws you removed in step 6.
20. Replace the plastic screw covers you removed in step 5;
insert the outside tab first and then snap them back into
place.
21. Turn the screen over and slide it back into the computer’s
two arms.
22. Replace the plastic covers on the front of the arms.
23. Replace the screen switch tops you removed in step 2; you
can just push them back on to the plastic stems.
A-8
Options and Maintenance