132
132 | Maintaining and Transporting the Printer
•
To change the language on the LCD screen, press d to highlight
LANGUAGE, then press r. Press d until you see the language you
want, then press
OK to select it. The printer exits maintenance
mode and returns to normal operation.
• To change the units of measurement, press d to highlight LENGTH
UNITS
, then press r. Press d to switch from METRIC to
FEET/INCH, then press OK to select it. Press l when done.
• To change the temperature units of measurement, press d to
highlight
TEMPERATURE UNITS, then press r. Press d to switch
from
C (Celsius or centigrade) to F (Fahrenheit), then press OK to
select it. Press
l when done.
• To change the number of times to perform and auto cleaning, press
d to highlight
AUTO CLEANING TIMES, then press r. Press u or
d to increase or decrease the value (from 1 to 3).
• To change the alert settings, press d to highlight MAINTENANCE
ALERT
, then press r. Press d to choose an item to receive a
maintenance alert, then press
OK to select it.
• To choose whether or not to show remaining cut sheets, press d to
highlight
CUT SHEET REMAINING, then press r. Press d to select
OFF or ON, then press OK to select the setting you want.
• To select the number of minutes to wait until automatically
entering sleep mode, press d to highlight
SLEEP MODE, then press
r. Press d to select 5, 15, 60, 120, or 180 MINUTES, then press
OK to select the setting you want.
• To set the amount of idle time required until the printer
automatically powered off, press d to highlight
POWER
MANAGEMENT
, then press r. Press r to DISABLE or ENABLE
the
POWER OFF TIMER, or press d to highlight TIME TO OFF,
press
r, then press u or d to increase or decrease the value. Press
OK to select the setting you want.
• To return all control panel settings to their default values, press d to
highlight
DEFAULT PANEL, then press r to display EXECUTE.
Press
OK to restore the default settings.
4. To exit maintenance mode, turn off the printer by pressing the P power
button. Press the P power button again to turn on the printer in the
normal operating mode.