Filter
Top Products
90
90 | Printing With Epson Drivers for Macintosh
Sizing Images for Borderless Printing on Roll
Paper
For true borderless printing on roll paper, you can select a Paper Size setting
with an
Auto Expand or Retain Size option, or create a custom paper size.
Your image may be clipped on the left and right edges, but you can
minimize clipping by sizing your image according to the paper width and by
adjusting the length by adding 0.1 inch (2.54 mm) to it.
Paper sizes with the
Auto Expand option provide the best solution for
borderless printing with minimal image clipping. Using this setting, you can
create an image width almost equal to the width of the roll media. If you use
a paper size with the
Retain Size option, you should create an image slightly
wider than the actual width of the roll media. Or you can create a custom
paper size and select the
Retain Size option. See the table below for
guidelines:
* Requires use of the borderless printing spacer.
Roll paper width
Image width
(with Auto Expand)
Image width
(with Retain Size)
8 inches*
(203 mm)
7.8 inches
(198.11 mm)
8.25 inches
(209.54 mm)
10 inches
(254 mm)
9.8 inches
(248.92 mm)
10.25 inches
(260.35 mm)
11 inches*
(279 mm)
10.8 inches
(274.32 mm)
11.25 inches
(285.75 mm)
13 inches
(330 mm)
12.8 inches
(325.12 mm)
13.25 inches
(336.54 mm)
14 inches
(356 mm)
13.8 inches
(350.52 mm)
14.25 inches
(361.95 mm)
16 inches
(406 mm)
15.8 inches
(401.32 mm)
16.25 inches
(412.75 mm)
16.5 inches*
(419 mm)
16.3 inches
(414.02 mm)
16.75 inches
(425.45 mm)
17 inches
(432 mm)
16.8 inches
(426.71 mm)
17.25 inches
(438.15 mm)
N
ote:
M
a
k
e sure you set
the margins to zero when
printing a custom page
size for borderless
printing.