Filter
Top Products
51
Handling Paper and Other Media | 51
•
Choose if you’re printing on canvas or other heavy media. Media
that is too thick may damage the cutter. Use of an external cutter/scissor
is recommended.
Also choose this setting if you want to print a series of pages and keep
them together for cutting later on. The following media (and other
similar materials) do not work with, or may shorten the life of, the
built-in cutter:
• Fine art paper
• Canvas
• Vinyl
• Matte board
• Heavyweight polyester banner media
Removing and Installing the Spacer
When you perform borderless printing on roll paper, you may need to install
the borderless printing spacer supplied with the printer, depending on the
width of the paper.
Installing the Spacer
1. Remove the black paper stop from the spindle. When the 3-inch core
adapters are attached to the spindle, remove both left and right adapters.
2. Install the borderless printing spacer onto the gray paper stop. Push the
spacer until the holes line up with the holes in the paper stop.
Removing the Spacer
1. Remove the black paper stop from the spindle.