Extreme Networks 200 Series Switch User Manual


 
Summit 200 Series Switch Installation and User Guide 305
C Supported Standards
ExtremeWare supports the following standards for the Summit 200 series switch.
Standards and Protocols
Management and Security
RFC 1058 RIP RFC 783 TFTP
RFC 1723 RIP v2 RFC 1542 BootP
RFC 1112 IGMP RFC 854 Telnet
RFC 2236 IGMP v2 RFC 768 UDP
RFC 2328 OSPF v2 (incl. MD5 authentication) RFC 791 IP
RFC 2154 OSPF with Digital Signatures
(password, MD-5)
RFC 792 ICMP
RFC 1587 NSSA option RFC 793 TCP
RFC 1765 OSPF Database Overflow RFC 826 ARP
RFC 2370 OSPF Opaque LSA Option RFC 2068 HTTP
RFC 1122 Host requirements RFC 2131 BootP/DHCP relay
IEEE 802.1D-1998 (802.1p) Packet priority RFC 2030 Simple Network Time Protocol
IEEE 802.1Q VLAN tagging RFC 1256 Router discovery protocol
RFC 2474 DiffServ Precedence RFC 1812 IP router requirement
RFC 1519 CIDR
RFC 1157 SNMP v1/v2c RFC 2239 802.3 MAU MIB
RFC 1213 MIB II RFC 1724 RIP v2 MIB
RFC 1354 IP forwarding table MIB RFC 1850 OSPF v2 MIIB
RFC 1493 Bridge MIB ExtremeWare Enterprise MIB
RFC 2037 Entity MIB HTML and Telnet management
RFC 1573 Evolution of Interface RFC 2138 RADIUS
RFC 1643 Ethernet MIB RFC 2925 Ping MIB
RFC 1757 Four groups of RMON RFC 2233 Interface MIB
ExtremeWare VLAN Configuration private MIB RFC 2096 IP Forwarding Table MIB
RFC 2021 RMON probe configuration 999 local messages, criticals stored
across reboots