Filter
Top Products
3-9
MVX VGA A Matrix Switchers • Operation
PRELIMINARY
Example 1: Creating a set of video and audio ties
In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the
front panel indications that result from your actions.
N
This example assumes that there are no ties in the current configuration.
1. Press and release the Esc button (figure 3-3).
ENTER PRESET VIEW ESC
CONTROL
Press the Esc button to clear all selections.
The LED blinks once.
= LED blinks once.
1
1
Figure 3-3 — Clear all selections
2. To select video and audio for the tie, if necessary, press and release the
RGBHV button and the Audio button until both the RGBHV and Audio LEDs
light (figure 3-4).
RGBHV AUDIO
I/O
Press the RGBHV button to toggle on and off.
The LED lights when selected.
Press the Audio button to toggle on and off.
The LED lights when selected.
Figure 3-4 — Select RGBHV and audio
3. Press and release the input 5 button (figure 3-5).
2 3 4 5 6
INPUTS
7
Press and release the Input 5 button.
The Input 5 LED lights.
Figure 3-5 — Select an input