Filter
Top Products
XTP T UWP 302 • Installation and Operation 9
Front Panel Connections
AUDIO IN
PWRHDCP HDMI VGA
HDMI IN
VGA IN
abc
Figure 9. Front Panel Connectors
a HDMI connectors — Connect a digital video source device to the HDMI connector. It
can accept HDMI, DVI, or dual mode DisplayPort video sources.
b Audio connector — Connect an analog audio source to the 3.5 mm tip-ring-sleeve
(TRS) jack.
Tip (+)
Sleeve ( )
Sleeve ( )
Ring (
-
)
Tip (+)
Audio Plugs.eps
RCA Connector
3.5 mm Stereo Plug Connector
(balanced)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 10. Wiring for TRS Audio
By default, audio input is selected automatically (see Audio input selection SIS
commands on page 19 to manually select audio inputs). When the HDMI input is
selected with automatic audio input selections, the transmitter prioritizes embedded
digital audio. The following table shows the audio format that is sent over the XTP
connection when a specific audio format is not specified.
Selected
Video Input
HDMI Embedded
Audio Present
Analog Audio
Present
Audio Sent Over XTP
VGA N/A Yes Analog audio
VGA N/A No No audio
HDMI Yes No HDMI embedded audio
HDMI Yes Yes HDMI embedded audio
HDMI No Yes Analog audio
HDMI No No No audio
c Analog video connector — Connect a video source to the female 15-pin HD
connector. It accepts RGBHV video signals.