Filter
Top Products
XTP T UWP 302 • XTP System Configuration Software 23
Using the XTP System Configuration Software
The XTP T UWP 302 can be controlled directly from the side panel config port or remotely
from an XTP matrix switcher.
Connections
When opening the XTP System Configuration Software, the Connections screen opens first.
This screen is used to establish communication with an XTP device USB (see Config port
on page 7).
Figure 19. Connections Screen
1. From the Connections screen, select the USB radio button.
2. Select the connected device to be controlled from the displayed list.
3. Click the Connect button.