Filter
Top Products
XTP T UWP 302 • SIS Configuration and Control 19
Command and Response Tables for SIS Commands
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Input Commands
Input selection
Select input
X!! InX!] Select input X!.
View the selected input
!
In
X!]
View the selected input.
Auto switch mode
Disable auto switch mode
E0AUSW} Ausw0]
Switch inputs manually (default).
Set priority to the highest
numbered active input
E1AUSW} Ausw1]
Automatically switch to the highest
numbered active input.
Set priority to the lowest
numbered active input
E2AUSW} Ausw2]
Automatically switch to the lowest
numbered active input.
View setting
EAUSW} AuswX#]
View the auto switch mode.
Audio Configuration Commands
Audio gain and attenuation
NOTE: Gain and attenuation commands are case-sensitive.
Set gain
X%G AudX&] Set gain to X%.
Set attenuation
X^g AudX&] Set attenuation to X^.
Increment audio level
+G or +g
Aud
X&]
Increase the audio level.
Decrement audio level
-G or -g
Aud
X&]
Decrease the audio level.
View audio level
G or g
Aud
X&]
View the audio level.
Audio input selection
Set audio input format
EIX@AFMT} AfmtIX@] Set the audio input format to X@.
View audio input format
EIAFMT} AfmtIX@]
View the audio input format.
Black video signal resolution
Set black signal resolution
EAX*AFMT} AfmtAX*] Set the black signal resolution to X*.
View black signal resolution
EAAFMT} AfmtAX*]
View the black signal resolution.
NOTE: X! = Input selection 1 = VGA (default)
2 = HDMI
X@ = Audio input format 0 = auto (default)
1 = digital embedded
2 = analog
X# = Auto switch mode 0 = disable (default)
1 = priority to the HDMI input (default)
2 = priority to the VGA input
X% = Audio gain adjustment 0 - 24 = decibels above 0
X^ = Audio attenuation adjustment –18 - 0 = decibels below 0
X& = Audio level adjustment –18 - +24 (0 dB = default)
X* = Black signal resolution 2 = 720p @ 50 Hz
4 = 720p @ 60 Hz (default)
6 = 1080p @ 60 Hz