Filter
Top Products
1
1-6 Operating the DocuColor
Starting and shutting down the DocuColor
Generally, you can leave the DocuColor running all the time. This section describes
how to shut down and restart the DocuColor when necessary.
Starting the DocuColor
To start the DocuColor, move the switch on the rear of the DocuColor to the On
position.
Diagnostic messages appear on the Control Panel. If any diagnostics fail, more
information and instructions appear. Contact your service representative if the
DocuColor encounters problems while running the diagnostics.
Resume Printing
Resume communication between the copier and the
DocuColor after you have finished making copies.
Run Diagnostics
This command is provided for service representatives. Use
the line selection buttons to select the diagnostic test you
want to run and choose
OK
. Contact your authorized
service/support technician for information about these
diagnostics.
Reboot Server
Shut down all DocuColor activity in the correct manner
and then restart. You should use this option instead of the
switch on the rear of the DocuColor.
Power switch in the
off position