Filter
Top Products
TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-73
2. Slide display into place by setting it so that the front edge of the LCD stand extends
approximately ½” over the lip in the center of the chassis with the right side aligned with
the right edge of the chassis. The brackets should align with the openings in the bottom of
the LCD stand. Push the stand back until the front edge of the LCD stand aligns with the
edge of the lip.
3. Press back on the latches in the front of the stand to lock the LCD into place and secure
with the screws