Filter
Top Products
TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-47
Audio
(optional)
pUSB
VGA
DVI
Under back of Stand
3. Thread the cables through the stand beginning with the larger cables first. Video cable
(either DVI or VGA) and powered USB are required. Audio cable and A-to-B USB
cable (for MSR or keypad/MSR) are optional. See cable configurations below.
DVI Cable Configuration
with optional Audio Cables
VGA Cable Configuration
with optional Audio
Audio
DVI
USB
Audio
DVI
USB
4. Use DVI or VGA, not both. Bend DVI (or VGA) 90° towards the outside of the bracket
(before the bridge) and then 90° again towards the LCD mount. Powered USB, audio
(optional), and A-to-B USB (optional) need to be threaded under the bridge.
A to B USB for opt. MSR
or Keypad MSR