Filter
Top Products
TeamPoS 3000 XL and XL
2
Overview
D900000145 Issue 3 1-5
1.3.1. TeamPoS 3000 Front Panel Switch and LCD Matrix
Symbols
Name
Switch/LED
Mounting Position
LED
Color
Remark
Power Switch
Under drop down
window in front panel
--
Depending on the BIOS setup, the
power switch can be instant off or
delayed off.
Power LED Outside of front door. Green
Indicates AC power is supplied to
the power supply and all DC
voltages are available to the
motherboard and other devices.
Port Power LED
Outside of front door,
below the Power LED.
Green
Indicates +24 and +5 V power is
on the printer and RS232 ports.
Turning off the port switch will
cause this light to turn off after 5
or more seconds.
Battery Backup
LED
Outside of front door
below the Port Power
LED.
Blinking
Yellow
Indicates terminal is running on
battery backup when “ON.”
Reset Switch Inside front panel door. --
Resets terminal, all data in
memory will be lost.
Dump Switch Inside front panel door. -- Not used.
Port Switch Inside front panel door --
Default setting is “ON“(right
position). Turns on/off power to
all RS232 ports (including COM 1
& COM 2).
N/A
5VDC MB Power
LED
Behind front panel. Amber
Indicates AC power is supplied to
the power supply and standby
voltages for motherboard are
available. Note: Do not remove
motherboard from chassis when
light is “ON” Unplug AC cord
before removing motherboard.
HDD LED
(Hard Disk Drive)
Inside front panel door. Green Indicates hard disk drive activity.
LAN LED Inside front panel door. Green
Indicates activity on the LAN
when lit
USB-IF2 & IF Inside front panel door. --
USB ports with +5V power
supplied when AC power light is
“ON”
Caution
: It is assumed that the user of this manual fully understands and strictly
adheres to proper Electrostatic Discharge (ESD) precautions. Failure to adhere to
precautions can cause damage to this equipment.
Always remove the power cord from the unit prior to performing any controller
maintenance.