Filter
Top Products
TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-77
5.18.2 Installing the Central Filler
The Central Filler is used to occupy the free space on a standard control unit with a stacked LCD
(either D22 or D25) and a model DT50III printer. The cable for the keyboard is threaded
through the underside of the central filler and therefore the keyboard is installed at the same time
as the Central Filler.
1. Install Central Filler by placing it on the chassis with the front edge aligned with the
central lip and ½” to the left of the LCD (facing the front of the unit).
2. Slide Central Filler to the right so that the front and back of the Central Filler align with
the front and back of the LCD.
Central Filler
LCD Stand Installed on
Standard TeamPoS 3000
Notice keyboard not
seated, cable under the
Central Filler
Slide Right