Filter
Top Products
Important notes Safety
6 A26361-K646-Z102-1-7619
Poper operation of the system, warranty features
!
WARNING!
• Proper operation of the device (in accordance with IEC 60950/DIN EN60950) is only ensured if
the casing is completely assembled and the rear covers have been put in place (electric shock,
cooling, fire protection, interference suppression).
• Before opening the device first switch it off and then disconnect the power plug.
• When opening the device observe the instructions in this Operating Manual or Technical
Manual for your device.
• Install only system expansions that satisfy the requirements and rules governing safety and
electromagnetic compatibility and relating to telecommunications terminal equipment. If you
install other expansions, you may damage the system or violate the safety regulations and
regulations governing RFI suppression. Information on which system expansions are suitable
can be obtained from the customer service centre or your sales outlet.
• The components (e.g. power supply) marked with a warning sign (e.g. lightning sign) may only
be opened, removed or exchanged by authorized, qualified personnel.
• The warranty is invalidated if the device is damaged during the installation or replacement of
system expansions.
• You may set only those resolutions and refresh rates specified in the "Technical data" section
of the monitor description. Otherwise you may damage your monitor. If you are in any doubt,
contact your sales outlet or customer service center.
Batteries
!
WARNING!
• Incorrect replacement of the device's battery may lead to a risk of explosion. The battery may
be replaced only with an identical battery or with a type recommended by the manufacturer
(see Technical Manual of the system board).
• Do not throw batteries into the trashcan. They must be disposed of in accordance with local
regulations concerning special waste.
• Replace the lithium battery on the system board in accordance with the instructions in the
Technical Manual for the system board.
• All batteries containing pollutants are marked with a symbol (crossed-out garbage can).
• In addition, the marking is provided with the chemical symbol of the heavy metal decisive for
the classification as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
• Data cables for peripherals must be adequately insulated to avoid interference.
Note on the laser
The CD-ROM drive contains a light-emitting diode (LED), classified according to
IEC 825-1:1993:LASER CLASS 1.