Filter
Top Products
The SCSI hard disk subsystem System components and expansions
A26361-K646-Z102-1-7619 45
Function of the indicators
Green indicator
The green LED lights up when the hard disk is accessed. You may not replace the hard disk at this
time!
Orange indicator
The orange indicator flashes when, in conjunction with a Disk Array Controller, the configuration is
determined or a rebuild is done. You may not replace the hard disk at this time!
The orange indicator stays bright if the hard disk is deactivated and/or defective and can be replaced.
8.1.2 Replacement of SCSI hard disk drive during operation
!
Never pull out a hard disk during operation if you are not sure that the hard disk is
operated on a disk array controller and is part of a disk array that operated in the mode
RAID Level 1 o
r
5.
!
Only if the orange indicator on the hard disk carrier remains bright may the hard disk be
replaced while the system is in operation.
If you replace an hard disk during operation, proceed as follows:
Ê Pull out the hard disk indicated as defective a few centimeters.
Ê Wait at least 60 seconds so that the Disk Array Controller can recognize that a hard disk has
been removed and also so that the hard disk can come to rest.
Ê Pull the hard disk completely out.
Ê Insert the new hard disk.