Filter
Top Products
Section Three
46
6. At the c:\> prompt, type cd fujitsu,
Press the Enter key.
7. At the c:\> fujitsu prompt, type
PHDISK. Press the Enter key.
8. The screen will display the size of the space
currently allocated to the Save-to-Disk
function and other parameters about the
space and the hard drive.
To remove all space allocation for the Save-to-
Disk function, do the following:
1. Click on Start.
2. Click on Shut Down.
3. From the Shut Down menu select the
restart option.
4. When the Fujitsu Logo appears on your
screen press F8 immediately, before the
Windows 98 SE banner appears on the screen.
5. Select 6. Safe mode command prompt only,
then press Enter.
6. At the c:\> prompt, type cd fujitsu,
then press Enter.
7. Type PHDISK /DELETE /FILE
Press the Enter key.
The utility will remove the space allocation for
the Save-to-Disk function and free that space
for other use.
To reset the Save-to-Disk parameters, use the
procedure below.
Resetting the Save-to-Disk Parameters:
1. Click on Start.
2. Click on Shut Down.
3. From the Shut Down menu select the
restart option.
4. When the Fujitsu Logo appears on your
screen press F8 immediately, before the
Windows 98 SE banner appears on the screen.
5. Select 6. Safe mode command prompt only,
then press Enter.
6. At the c:\> prompt, type cd fujitsu,
then press Enter.
7. At the c:\>fujitsu prompt, type
phdisk / delete / file,
then press Enter.
8. The press any key to restart the computer.
9. When the Fujitsu Logo appears on your
screen press F8 immediately, before the
Windows 98 SE banner appears on
the screen.
10. At the c:\> prompt, type cd fujitsu,
then press Enter.
11. At the c:\fujitsu prompt, type
phdisk / create / file,
the press Enter.
12. The press any key to restart the computer.
CAUTION
Never use PARTITION in place of FILE
with the PHDISK Utility or you will
reformat your internal hard drive and
all data, applications and operating
system will be destroyed.