Filter
Top Products
Section Five
66
3. Your software may not have the correct 3. See your software documentation and
software driver active. activate the correct driver.
4. You may have the wrong I/O address selected 4. See your PC Card documentation to
for your PC Card device. determine the required I/O address.
5. Your PC Card device and another device are 5. Check all I/O addresses in the BIOS setup
assigned the same I/O address. utility and your other installed hardware
and make sure there are no duplications.
Power Failures
You turn on your notebook and nothing 1. The internal battery is completely discharged, 1. When all the batteries are dead there will
seems to happen. and there is no power adapter (AC or auto/ be a beep when the power switch is turned
airline) installed. on and the notebook will immediately go
into Dead Battery Suspend mode. (See page
31.) Check the Status Indicator panel to
determine the presence and condition of
the batteries. (See page 22.) Install a
power adapter if all batteries are dead
or unavailable. (See page 10.)
Symptom Possible Cause Possible Solution
A card inserted in the PC Card slot does not
work or is locking up the system (continued).