Filter
Top Products
System Information and Statistics commands Command Reference
Intelligent Blade Panel Module
135
Privileged Exec
Display Message
Current Time displays system time
7.3.3 show eventlog
This command displays the event log, which contains error messages from the system, in the
Primary Management System . The event log is not cleared on a system reset.
Syntax
show eventlog
Default Setting
None
Command Mode
Privileged Exec
Display Message
File: The file in which the event originated.
Line: The line number of the event.
Task Id: The task ID of the event.
Code: The event code.
Time: The time this event occurred.
Note: Event log information is retained across a system reset.
7.3.4 show running-config
This command is used to display/capture the current setting of different protocol packages
supported on IBP. This command displays/captures only commands with
settings/configurations with values that differ from the default value. The output is displayed in
script format, which can be used to configure another IBP with the same configuration. When a
script name is provided, the output is redirected to a configuration script. The option [all] will
also enable the display/capture of all commands with settings/configurations that include
values that are same as the default values. If the optional <scriptname> is provided with a file