Filter
Top Products
Security Menu
Web-Based Management Interface
Intelligent Blade Panel Module
90
6.2.3 Security Menu
6.2.3.1 Managing RADIUS
6.2.3.1.1 Configuring RADIUS Configuration Page
Configurable Data
Max Number of Retransmits - The value of the maximum number of times a request
packet is retransmitted. The valid range is 1 - 15. Consideration to maximum delay time
should be given when configuring RADIUS maxretransmit and RADIUS timeout. If multiple
RADIUS servers are configured, the max retransmit value on each will be exhausted
before the next server is attempted. A retransmit will not occur until the configured timeout
value on that server has passed without a response from the RADIUS server. Therefore,
the maximum delay in receiving a response from the RADIUS application equals the sum
of (retransmit times timeout) for all configured servers. If the RADIUS request was
generated by a user login attempt, all user interfaces will be blocked until the RADIUS
application returns a response.
Timeout Duration (secs) - The timeout value, in seconds, for request retransmissions.
The valid range is 1 - 30. Consideration to maximum delay time should be given when
configuring RADIUS maxretransmit and RADIUS timeout. If multiple RADIUS servers are
configured, the max retransmit value on each will be exhausted before the next server is
attempted. A retransmit will not occur until the configured timeout value on that server has
passed without a response from the RADIUS server. Therefore, the maximum delay in
receiving a response from the RADIUS application equals the sum of (retransmit times
timeout) for all configured servers. If the RADIUS request was generated by a user login
attempt, all user interfaces will be blocked until the RADIUS application returns a
response.
Accounting Mode - Selects if the RADIUS accounting mode is enabled or disabled.
Non-Configurable Data
Current Server IP Address - The IP address of the current server. This field is blank if no
servers are configured.
Number of Configured Servers - The number of RADIUS servers that have been
configured. This value will be in the range of 0 and 3.
Command Buttons
Submit - Sends the updated screen to the IBP and causes the changes to take effect on
the IBP but these changes will not be retained across a power cycle unless a save is
performed.
Refresh - Update the information on the page.