Filter
Top Products
Management Commands Command Reference
Intelligent Blade Panel Module
183
password-threshold <0-120>
no password-threshold
<threshold> - max threshold (Range: 0 - 120).
no -
This command sets the maximum value to the default.
Default Setting
3
Command Mode
Telnet Config
7.5.3.6 maxsessions
This command specifies the maximum number of remote connection sessions that can be
established. A value of 0 indicates that no remote connection can be established. The range is
0 to 5.
Syntax
maxsessions <0-5>
no maxsessions
<0-5> - max sessions (Range: 0 - 5).
no -
This command sets the maximum value to be 5.
Default Setting
5
Command Mode
Telnet Config
7.5.3.7 sessions
This command regulates new telnet sessions. If sessions are enabled, new telnet sessions can
be established until there are no more sessions available. If sessions are disabled, no new
telnet sessions are established. An established session remains active until the session is
ended or an abnormal network error ends it.