Filter
Top Products
Connecting the IBP Module Configuration the IBP Module
Intelligent Blade Panel Module
34
5.2 Connecting the IBP Module
Before configuring the IBP Module, PRIMERGY BX600 Blade Server console port must be
connected to the IBP Module. To connect PRIMERGY BX600 Blade Server console port to the
IBP Module, perform the following:
1. Mount the IBP Module.
On the console monitor the MMB application displays a login screen.
The IBP Module bootup screen is displayed.
Welcome to Management Blade 1.70D
<Username>:
+-----------------------------------------------------------------------------+
| Console Menu |
+-----------------------------------------------------------------------------+
(1) Management Agent
(2) Emergency Management Port
(3) Console Redirection
(4) TFTP update
(5) Logout
(6) Reboot Management Blade
(7) System Information Dump
Enter selection: 5
+-----------------------------------------------------------------------------+
| Logout!!! |
+-----------------------------------------------------------------------------+
ATE0
ATE0
2. Enter the provide and password. The console menu is displayed.
Welcome to Management Blade 1.70D
<Username>:root
<Password>:****
+-----------------------------------------------------------------------------+
| Console Menu |
+-----------------------------------------------------------------------------+
(1) Management Agent
(2) Emergency Management Port
(3) Console Redirection
(4) TFTP update