Filter
Top Products
Panel Settings Menu
Web-Based Management Interface
Intelligent Blade Panel Module
71
6.2.2.1.8 Defining DHCP Client
Configuring DHCP Restart Page
This command issues a BOOTP or DHCP client request for any IP interface that has been set
to BOOTP or DHCP mode via the IP address command. DHCP requires the server to reassign
the client's last address if available. If the BOOTP or DHCP server has been moved to a
different domain, the network portion of the address provided to the client will be based on this
new domain.
Command Buttons
Reset - Send the updated screen to the IBP to restart the DHCP client.
Configuring DHCP Client-identifier Page
Specify the DCHP client identifier for the IBP. The DCHP client identifier is used to include a
client identifier in all communications with the DHCP server. The identifier type depends on the
requirements of your DHCP server.
Non-Configurable Data
Current DHCP Identifier (Hex/Text) - Shows the current setting of DHCP identifier.
Configurable Data
DHCP Identifier - Specifies the type of DHCP Identifier.
z Default
z Specific Text String
z Secific Hexadecimal Value
Text String - A text string.
Hex Value - The hexadecimal value.
Command Buttons
Submit - Send the updated screen to the IBP perform the setting DHCP client identifier.