Filter
Top Products
Groups Administration
Web-Based Management Interface
Intelligent Blade Panel Module
46
6.2.1.2 Managing Port Groups
6.2.1.2.1. Configuring Port Group Configuration Page
The purpose of the port group configuration is to create port groups, and to modify the existing
port groups. Only the internal ports could be defined to be the member of the port groups. The
external connection is defined by specifying an Uplink Set.
Selection Criteria
Group Name – Use this pull-down menu to select one of the existing groups.
Configurable Data
Group Name – Input the group name to create a new port group. It can be up to 32
alphanumeric characters, including blanks.
Uplink Set Name – Use the pull-down menu to configure external connection for this port
group.
Participation – Use the pull-down menu to configure a interface to participate in this port
group. The factory default is ‘Exclude’. The possible values are:
- Include: This interface is the member of the port group.
- Exclude: This interface is not the member of the port group.
Non-Configurable Data
Slot/Port – The interface
Type – The interface type. Type should be internal.
Status – The interface is belong to this port group or not.