SE0X7GD1X
name fjgi
parent /pci@3,700000/pci@0
unit-address
instance 6 is 4
instance 7 is 4,1
SE0X7GQ2X
name fjgi
parent /pci@4,600000/pci@0 /pci@4,600000/pci@0,1
unit-address
instance 8 is 4
instance 9 is 4,1
instance 10 is 6
instance 11 is 6,1
- The location of the fjgi.conf file depends on the model of the host system as described below:
1. SPARC Enterprise Txxxx series and SPARC T3 series
/platform/sun4v/kernel/drv/fjgi.conf
2. SPARC Enterprise Mxxxx series
/platform/SUNW,SPARC-Enterprise/kernel/drv/fjgi.conf
- Examples of setting parameters in the fjgi.conf file are shown below.
Example 1: The parameters for fjgi0 (the instance number 0 port of SE0X7GQ1X (10/100/1000BASE-T)) is set to "Auto-Negotiation
is disabled", "Connect at 100Mbps" and "Half-Duplex operation is enabled".
The parameter values need to be set by a character string like name="fjgi", parent="/pci@1,700000/pci@0", unit-address="4",
AutoNegotiation_A="Off", LinkSpeed_A="100", DuplexCapabilities_A="Half".
The following is added to the fjgi.conf file:
name="fjgi" parent="/pci@1,700000/pci@0" unit-address="4"
AutoNegotiation_A="Off" LinkSpeed_A="100" DuplexCapabilities_A="Half";
Example 2: The parameters for fjgi4 (the instance number 4 port of SE0X7GD2X (1000BASE-SX)) is set to "Auto-Negotiation is
enabled", "Connect at 100Mbps" and "Full-Duplex operation is enabled".
The parameter values need to be set by a character string like name="fjgi", parent="/pci@2,600000/pci@0", unit-address="4",
AutoNegotiation_A="On", LinkSpeed_A="100", DuplexCapabilities_A="Full".
The following is added to the fjgi.conf file:
name="fjgi" parent="/pci@2,600000/pci@0" unit-address="4"
AutoNegotiation_A="On" LinkSpeed_A="100" DuplexCapabilities_A="Full";
Example 3: The MTU parameter for fjgi9 (the instance number 9 port of SE0X7GQ2X (10/100/1000BASE-T)) is set to 8000.
The parameter value needs to be set by numerical value like fjgi_mtu=8000.
The following is added to the fjgi.conf file:
name="fjgi" parent="/pci@4,600000/pci@0" unit-address="4,1"
fjgi_mtu=8000;
- 24 -