Fujitsu fi-6230 Scanner User Manual


 
Press center of ADF
ATTENTION
Make sure that the ADF is completely closed. When it is not completely closed,
feeding errors may occur.
When the scanning is completed or canceled, the documents might remain inside the
ADF even though any error message is not displayed.
Follow the procedure below to remove the documetns remaining in the ADF.
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pulling the ADF open lever toward you.
3. Remove the remaining documents.
4. Close the ADF.
All Rights Reserved. Copyright 2007 © PFU LIMITED