Filter
Top Products
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
6.3 Remedying Typical Troubles
Symptom: The scanning does not start.
Back
Did you unlock the transport lock of the
Flatbed? (fi-6230 only)
NO
Turn OFF the scanner and unlock the transport
lock.
(Refer to "2.1 Installing the Scanner in "fi-
6130/fi-6230 Getting Started.")
YES
Are the document loaded correctly on the ADF
paper chute?
NO
Load the document correctly on ADF paper
chute.
YES
Is the ADF closed completely?
NO
Remove the document in the ADF paper chute,
open the ADF, and then close it completely.
YES
Is the interface cable connected correctly?
NO
Connect the interface cable correctly.
(Refer to "2.2 Connecting the Scanner to Your
PC" in "fi-6130/fi-6230 Getting Started.")
YES
Is the connector of interface cable broken?
YES
Use a new interface cable and correctly
connect it.
NO
Does the scanning start after running ON the
scanner again?
YES
The scanner operation is normal.
NO