Fujitsu fi-6230 Scanner User Manual


 
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
7.2 Document Quality
Document Type
The following paper types are recommended for document use:
Woodfree paper
Wood containing paper
When using documents of paper type other than the above, check whether or not the document can be scanned by test-
scanning a few sheets before executing the actual document.
Any other paper types of documents can be scanned through the Flatbed.
Document Thickness
Paper thickness is expressed by "paper weight." The following shows the paper weights that can be used on this scanner:
41 g/m
2
to 210 g/m
2
Only paper weight of 127 g/m
2
to 210 g/m
2
is acceptable for A8-size documents.
Precautions
The following documents may not be scanned successfully:
Documents of non-uniform thickness (e.g. envelopes and photo-attached documents)
Wrinkled or curled documents (See HINT below.)
Folded or torn documents
Tracing paper
Coated paper
Carbon paper
Photosensitive paper
Perforated documents
Documents that are not square or rectangular
Very thin documents
Photographs
Do not use the following documents:
Paper-clipped or stapled documents
Documents on which the ink is still wet
Documents smaller than A8 in size
Documents wider than A4 or Letter size (216 mm)
Documents other than paper such as fabric, metal foil, or transparencies
Important documents such as certificates and cash vouchers that must not get scratched or become smeared
HINT
When scanning semi-transparent documents, slide the [Brightness] bar to light to
avoid bleed through.
To prevent the rollers from becoming dirty, avoid scanning documents containing
large areas written or filled in pencil. If scanning of such documents is inevitable,
clean the rollers more frequently.