Filter
Top Products
MX130 S2 Upgrade and Maintenance Manual 185
Main memory
Figure 116: Removing memory modules
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector.
Ê Remove the ejected memory module.
10.3.4 Concluding steps
Perform the following procedures to complete the task:
Ê Follow all procedures described in section "Closing the server" on page 54.
Ê If available, update the system board BIOS to the latest version as described
in section "Updating the system board BIOS" on page 62.
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section "Enabling
BitLocker functionality" on page 66.