Filter
Top Products
54 Upgrade and Maintenance Manual MX130 S2
Basic hardware procedures
4.5 Closing the server
V CAUTION!
● Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
● In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY MX130 S2 server must not run while the server cover is
removed.
● For further safety information, please refer to chapter "Important
information" on page 31.
4.5.1 Mounting the server cover
Figure 9: Mounting the server cover
Ê Fit the server cover on the chassis.