Filter
Top Products
80 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● For further safety information, please refer to chapter "Important
information" on page 31.
In this chapter
● "Mounting order" on page 82
– 3.5-inch HDD subsystem
● "Installing 3.5-inch HDD in HDD1 / HDD2 chassis bay" on page 83
● "Removing 3.5-inch HDD out of HDD1 / HDD2 chassis bay" on page 88
● "Installing additional 3.5-inch HDD in 3.5-inch chassis bay" on page 91
● "Removing additional 3.5-inch HDD out of 3.5-inch chassis bay" on page 94
● "Installing additional 3.5-inch HDD in 5.25-inch dummy cover" on page 97
● "Removing 3.5-inch HDD out of 5.25-inch dummy cover" on page 100
● "Installing additional 3.5-inch HDD in 5.25-inch ODD/HDD bracket" on
page 103
● "Removing 3.5-inch HDD out of 5.25-inch ODD/HDD bracket" on page 106
– 2.5-inch HDD subsystem
I2.5-inch SATA HDDs available on project request in EMEA market only.
● "Installing 5.25-inch dummy cover" on page 110
● "Removing 5.25-inch dummy cover" on page 112
● "Installing ODD in 5.25-inch chassis bay" on page 115
● "Removing ODD out of 5.25-inch chassis bay" on page 118
● "Installing slimline ODD in 5.25-inch ODD/HDD bracket" on page 121
● "Removing slimline ODD out of 5.25-inch ODD/HDD bracket" on page 125