Filter
Top Products
MX130 S2 Upgrade and Maintenance Manual 27
Before you start
2.3 Tools you need at hand
When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
Screw driver /
Bit insert
Screw Usage Type
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
Board,
Front USB
M3 x 4.5 mm
(silver)
C26192-Y10-C67
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
HDD3, HDD4
UNC
6-32 x 4.76 mm
(black)
C26192-Y10-C75
TPM bit insert
Dedicated TPM
screw driver /
TPM module
fixing tool (for the
Japanese market)
TPM screw
One way
head
(black)
REM 3 x 15 mm
(black)
C26192-Y10-
C176
Phillips
PH1
2.5 HDD
(on request
only)
M3x 3.5 / 0.25 Nm
(silver)
C26192-Y10-
C102
Torx Plus Size 6
Philips (+) No.00
silver
For EMEA: Torx
For Japan: Philips
slimline ODD
in additional
5.25 inch
bracket
M 2.0 x 2.5 /
0.2 Nm
C26192-Y10-
C163
Front Fan Rivets
Pincer / Side
cutter
System fan C26361-K690-C3
Table 2: List of required tools and used screws