Filter
Top Products
94 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.6 Removing additional 3.5-inch HDD out of
3.5-inch chassis bay
7.6.1 Required tools
● Preliminary and concluding steps: tool-less
● Installing a 3.5-inch HDD
– Phillips PH2 / (+) No. 2 screw driver
7.6.2 Preliminary steps
Before installing a 3.5-inch HDD, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Open the front cage as described in section "Opening the front cage" on
page 52.
Ê Locate the correct drive bay as described in section "Mounting order" on
page 82.