Fujitsu MX130 S2 Server User Manual


 
MX130 S2 Upgrade and Maintenance Manual 39
Important information
3.2 ENERGY STAR
I Energy Star is applicable only for 230 V mains voltage.
ENERGY STAR does not apply to the Japanese market.
In typical configurations the PRIMERGY MX130 S2 satisfies the
stringent requirements of the Ecolabel Energy Star for
Computers Version 5.0. These requirements ensure energy
savings when computers are being used and performing a range
of tasks, as well as when they are turned off or into a low power
mode. For example, the power consumption of the PRIMERGY
MX130 S2 in the operation mode “idle” is less than 65 W.
Products that have been certified compliant with ENERGY STAR
and identified as such are in full compliance with the specification
at shipping. Note that energy consumption can be affected by
software that is installed or any changes that are made to the
BIOS or energy options subsequently. In such cases, the
properties guaranteed by ENERGY STAR can no longer be
assured.
Devices that are certified in accordance with ENERGY STAR
environmental standards help to save money and reduce
greenhouse gas emissions.
Detailed information concerning the requirements for the
ENERGY STAR eco-label, as well as products that satisfy these
requirements, can be found on the Internet at
http://www.energystar.gov/ .
After you have installed your OS you can configure the energy
saving settings by yourself (amongst others switch off the
monitor 15 minutes). How you have to configure these energy
saving settings is described in the documentation supplied with
the OS.
The "ServerView Operations Manager" user guide contains
instructions for reading out measurement values, including those
relating to current energy consumption and air temperatures.
Either the Performance Monitor or the Task Manager can be
used to read out CPU utilization levels.