Fujitsu P3PC-1132-07ENZ0 Scanner User Manual


 
8.1 Error Messages and Remedies
fi-5000N Operator’s Guide 87
Troubleshooting
8
Scanner Device Alarms
If one of the following messages are shown on fi-5000N Message display, it is likely that the scan-
ner has hardware problem. In this case, turn off the scanner and fi-5000N power and turn them on
again. If the same device alarm occurs, contact the store where you purchased the scanner or an
authorized FUJITSU scanner service provider.
No. Message No Message
1 Temporary shortage of scanned data 12 LSI malfunction
2 EEPROM Error 13 Heater malfunction (ADF Front)
3 Fuse for ADF motor blown 14 Heater malfunction (ADF Back)
4 Background changeover unit failure 15 Heater malfunction (Flatbed)
5 Optical error 16 Motor fuse malfunction
6 Imprinter error 17 Lamp fuse malfunction
7 Fuse for Imprinter blown 18 Optical error (ADF Front)
8 Flatbed motor malfunction 19 Optical error (ADF Back)
9 Memory malfunction 20 Optical error (Flatbed)
10 Sensor malfunction 21 Fan malfunction
11 Internal communication error of the
scanner
22 Option board malfunction