Filter
Top Products
20
3.6 Beep Sound Configuration
The beep that sounds each time an operation is done, can be set on or off. (The default setting is
"Beep".)
1. Open the fi-5000N’s cover and press the [SET] key.
The following settings screen appears.
2. With the [L] key, select "Administrator Setup", and press the [ENT] key.
The screen to enter the Administrator's PIN (personal iden-
tification number) appears.
3. Enter the Administrator PIN (the default setting is "5000"), and press the [ENT] key.
The following screen appears.
4. With the [L] key, select "Beep On/Off", and press the [ENT] key.
The following screen appears.
5. To set the beep sound on, select "Beep"; to set it off, select "mute" and then press the
[ENT] key.
The following screen appears.
With this, the beep sound setting is done.
Setup
Register Finger
Change PIN Code
Show Network Config
PIN:_
Cancel:[ESC]
Administrator Setup
Configure Network
Pull Mode Authentic
Auto Logout Time
Beep sound
Beep
Mute
Beep sound setting
changed