Filter
Top Products
1. In the backup list in the Backup page, select the target backup.
2. Click the Restore button to start the restore.
4.3.8 Setup Firewall
Change the firewall settings.
The firewall rule set parameter values can be changed in the firewall settings.
Perform the following steps to change the firewall settings:
1. Display the L-Platform Details page
Refer to "4.3.2 L-Platform Detailed Information Display" for the display method.
2. Select the firewall, and then click the Setting button.
3. A pop-up window is displayed.
- Label: Displays the parameter label
- Description: Displays an explanation of the parameter
- Value: Enter the value to be set for the parameter
4. When the Update button is clicked, a confirmation message is displayed.
Click the OK button to save and apply the firewall settings.
Point
Firewall settings cannot be set by L-Platform subscription or L-Platform reconfiguration.
- 53 -