Filter
Top Products
95
www.gateway.com
To recover the old BIOS:
1 Turn on or restart the server.
2 Press and hold CTRL+HOME. The old BIOS is recovered.
To manually recover the BIOS:
1 Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2 Follow the instructions in “Opening the server case” on page 44.
3 Remove the jumper across pins 2-3 of jumper J1H3 (Rcvr Boot), then place the jumper
across pins 1-2.
4 Follow the instructions in “Closing the server case” on page 39.
Caution Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.