Filter
Top Products
20
www.gateway.com
Starting your server
Before you start your server for the first time:
■ Make sure that the server and monitor are plugged into a power outlet or surge
protector and that the surge protector (if you are using one) is turned on.
■ Make sure that all cables are connected securely to the correct ports and jacks on the
back of the server.
To start the server:
1 Turn on any peripheral devices connected to the server.
2 Press the power button.
Caution When you connect peripheral devices to the server, make sure that
your server and devices are turned off and the power cords are
unplugged.
Power button
System fault LED
Reset button
Power LED