Filter
Top Products
96
www.gateway.com
5 Insert a DOS-bootable USB disk-on-key or DOS-bootable CD containing a valid BIOS
image.
6 Reconnect the power cords and turn on the server. The BIOS recovery is initiated.
While the BIOS is being recovered, the monitor displays a blue screen and the server
will beep continually. The process is complete when the server stops beeping.
7 Remove the bootable USB disk-on-key or CD.
8 Turn off the server, then disconnect the power cords and all other cables connected
to the server.
9 Follow the instructions in “Opening the server case” on page 38.
10 Place the jumper back onto pins 2-3.
11 Follow the instructions in “Closing the server case” on page 39.
12 Plug in the AC power cords and turn on the server, then verify that the recovery was
successful.