Filter
Top Products
62
www.gateway.com
9 Press and hold the CTRL key, then press the E key. The RAID BIOS console will open.
10 Configure the RAID options, then exit the RAID BIOS console.
11 Reboot the server.
To configure the SATA RAID solution:
1 Open the BIOS Setup utility as described in the previous procedure.
2 Select Configure from the Management menu, then select Easy Configuration.
3 Press the SPACEBAR to associate the selected physical drives with the current array. The
indicator changes from READY to ONLINE.
4 Press Enter when you finish creating the current array, then press F10 to select
configurable arrays.
Important When you press CTRL + E to configure the SATA RAID, you will see
the following error message: Error (0146): Insufficient Memory
to Shadow PCI ROM. This error message can be ignored.