CHAPTER 4: Upgrading Your Computer
38
6 Slide the fan out of the computer.
7 Plug the new fan’s power cable into the system board.
8 Slide the new fan into the computer. Make sure that you
line up the posts on the bottom with the guide slots
inside the case.
9 Rotate the fan up until it lays flat against the computer
and clicks into place.
10 Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
Installing memory
When you upgrade the computer memory, make sure that you
install the correct type of memory module for your computer.
Your computer uses DIMM memory.
To install or replace DIMM memory:
1 Remove the back panel by following the instructions in
“Opening the case” on page 35.
2 Remove the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
3 Find the memory module banks on your system board.
8512032.book Page 38 Tuesday, January 9, 2007 1:47 PM